Mahindra & Mahindra is Hiring | Assistant Manager |

Position – Assistant Manager – Controls (BIW)
Company – Mahindra & Mahindra Ltd
Exp. – 2 to 6 years
Location – Chakan, Pune, Maharashtra, IN

Job description

Responsibilities & Key Deliverables

• Do a manufacturing feasibility study for a new model introduction in the existing line.
• Develop BIW process plans for Manual and Robotic welding Lines.
• Develop BIW Robotic welding simulation cells and OLP in PS Team center / stand-alone.
• Generate standards and check sheets for Simulation and OLP through benchmarking and lessons learned.
• Collaborate with CME process, PLC, and Line builders for verification of Simulation and OLP during DAP and trials at suppliers.
• Installation and commissioning with post-SOP support for Process and cycle time proveout.
• Line layout, Manufacturing process flow, Cycle time chart, and RFQ preparation of BIW subassembly.
• Do process study wrt gun, equipment, and fixtures and suggest suitable changes in product to ensure first-time-right manufacturability.
• Build up the station/cell/line in PS by adding all relevant resources.
• Check for Gun reachability, apply all kinematics to relevant tools, and create a robot path with zero collision with basic tools.
• Generate basic path (welding, tip dressing, etc.) and zoning conditions to avoid any collisions.
• Collaborate and Coordinate with Line builders to get the line simulation done and optimize the robot paths, and robot zoning and again give feedback for any improvement required in design.
• Hands-on experience with virtual controllers such as ABB/Fanuc/KUKA etc., generate the OLP with a cycle time accuracy of 99%.
• Find out the root causes of achieving cycle time targets if not achieved.
• Ensure Zero error/collision/losses through continuous involvement with the execution team.

Preferred Industries – Automobile

Education Qualification

• Bachelor of Engineering in Electrical / Electrical & Electronic / Mechatronic / Mechanical / Automobile
• Diploma in Engineering in Electrical / Electrical & Electronic / Mechatronic / Mechanical / Automobile

General Experience

• 2 to 6 years of relevant experience